Schmitt Enterprises Inc.

Stabilizers / Stakes - Super Stakes | Schmitt Enterprises Inc
  Price Qty
SUPER STAKES

 

These Bullet Point Super Stakes are the state of the art in trap anchoring systems. They can solve 99% of your staking problems. These lightweight, heavy-duty stakes are easier to drive and hold better than any other staking system. Super Stakes won’t fold up, like the cheap stamped stake ends do! One Super Stake, equipped with 12” of cable will hold as good as two 1/2” x 18” crossed rebar stakes. Simple to use: Attach the cable to your trap chain with in-line swivel. 1.) Insert a driver into the stake and drive down in your trap bed, until the top the swivel is level with the trap bed. 2.) Remove the stake drive. 3.) Pull up on the chain to set the stake. That’s it! The driver can usually be pulled out with your hand and the stakes will set on the first pull 99% of the time. In most cases, the stakes can be dug up as fast as two rebar stakes can be pulled.
At least 90% of the trappers that try Super Stakes never go back to other staking systems!
SUPER STAKE ENDS (NO CABLE)
Product Image
Super Stake Ends (two pictured)

Bullet point one-piece steel stake end ready for cable or chain.


SUPER STAKE & 12" CABLE
Product Image
Super Stake & 12" Cable

With 12" of 3/32" 7 x 7 Cable.

Made up with 7 x 7 aircraft cable and heavy duty aluminum ferrules.

Use for both land and water trapping.

Swivels NOT included.


SUPER STAKE & 18" CABLE
Product Image
Super Stake & 18" Cable

With 18" of 3/32" 7 x 7 Cable.

Made up with 7 x 7 aircraft cable and heavy duty aluminum ferrules.

Use for both land and water trapping.

Swivels NOT included.


SUPER STAKE DRIVER
 

9/16" cold-roll Heavy Duty steel driver with turned down end.


 

FINNED SUPER STAKES

Fox Hollow’s newest addition to its line of high quality products. Added fins for double the holding power of the Original Super Stake for use in loose soil, plowed fields, dry sand, extremely wet soil, stream and lake banks and bottoms, etc. Also added a Retrieval Boss for pulling the stake. Electro Galvanized to retard rust. (Makes cleaning out the driving hole a little easier.) When using a retrieving wire or cable for land trapping – keep the top of the wire at least two inches below the trap bed to prevent interference with the trap. 1/4” Boss holes will accept 3/16” S-hooks for chain or up to 3/16” cable.

One-Piece Precision Cast Malleable Steel
No Welds to Break!
 
Why risk loosing your catch and equipment when you can buy the very best trap stake for a few cents more?
FINNED SUPER STAKE - ENDS ONLY
NO Cable
Product Image
Finned Super Stake Ends
FINNED SUPER STAKE & 12" CABLE
Product Image
Finned Super Stake & 12" Cable

With 12" of 1/8" 7 x 7 Cable (NO Swivels)


FINNED SUPER STAKE & 18" CABLE
Product Image
Finned Super Stake & 18" Cable

With 18" of 1/8" 7 x 7 Cable (NO Swivels)