Schmitt Enterprises Inc.

Trapping Dye and Trapping Wax | Schmitt Enterprises Inc
  Price Qty
WAX
TRAP WAX
Product Image
Wax

Specially formulated for the trapper. Non-cracking, odorless, white trap wax. Sealed in plastic, to prevent contamination. Use in pure form - dip clean, dry traps in pure melted wax.


BLACK TRAP WAX
Product Image
Black Wax

Excellent for both dryland predator and water sets. Odorless (contains no beeswax), has special plastic-like metal binding qualities, remains flexible at extremely cold temperatures and helps to conceal your traps.



DYE & DIP
KBL QUICK DYE - BROWN
 

 

Kaatz Bros. Lures proudly introduces this new cold dip. Directions: Mix 3 parts unleaded gas with one part KBL Quick Dye to give traps or snares a rust resistant, odorless finish. Use white gas/Coleman Lantern Fuel for best results, if using gasoline use a higher octane. When using mineral spirits, mix 2 parts to one part KBL Quick Dye. Traps/snares should be degreased and allowed to rust slightly before dipping with KBL Quick Dye. Traps should be dipped (for 20-30 seconds) and hung to dry in warm weather (65 degrees or warmer). KBL Quick Dye will coat best during hot days. One quart will dye about 2 dozen small traps (#1 longsprings, #110 body grips) or 1 dozen larger traps (MB-750, #330 body grips).

 
LOGWOOD DYE
Product Image
Logwood Dye

Red powder that turns black when mixed with water. Removes light rust and turns traps a dark black color. Works as well as black dye and is considerably cheaper. Instructions: In a container large enough to cover the amount of traps you want to treat per time, add 1 pound of dye to each 5 gallons of boiling water and simmer for 1 hour. Add water as needed, to keep traps completely covered. Remove traps, rinse with water, and hang to dry. Can be used on all steel traps.


BLACK DYE CRYSTALS
Product Image
Black Dye Crystals

Genuine black crystals. This dye removes rust and turns traps a dark blue-black color. Instructions: Same as above, but add 1 pound of black crystals to each 10 gallons of boiling water.  14 oz bag


ANDY STOE'S SPEED DIP - BLACK
Product Image
Speed Dip - Black - Gallon

Quick Dry Formula. Seals, Penetrates, and Rejuvenates old and new steel traps. Mix 1 quart dye to 4-5 quarts unleaded gasoline in a resealable container. Dip traps, cleaned of loose rust, oil, or old wax, in dye and let air dry for 4 to 6 days. Dye works as well for water trapping or land trapping, including canines.

Softens rubber and is not recommended for padded traps.

ANDY STOE'S SPEED DIP - BROWN
 

Quick Dry Formula. Seals, Penetrates, and Rejuvenates old and new steel traps. Mix 1 quart dye to 4-5 quarts unleaded gasoline in a resealable container. Dip traps, cleaned of loose rust, oil, or old wax, in dye and let air dry for 4 to 6 days. Dye works as well for water trapping or land trapping, including canines.

Softens rubber and is not recommended for padded traps.

 
ANDY STOE'S SPEED DIP - WHITE
 

Quick Dry Formula. Seals, Penetrates, and Rejuvenates old and new steel traps. Mix 1 quart dye to 4-5 quarts unleaded gasoline in a resealable container. Dip traps, cleaned of loose rust, oil, or old wax, in dye and let air dry for 4 to 6 days. Dye works as well for water trapping or land trapping, including canines.

Softens rubber and is not recommended for padded traps.

 
FORMULA ONE TRAP DIP - BROWN
 

Professional blend trap and snare treatment that deodorizes. Protects and dries in about 24 hours. No sticky finish or waxing needed. Water soluble mix that is non-flammable. Water clean up and reusable. Mix with 2 to 3 parts of water. ODOR FREE!  FAST DRY!


 
FORMULA ONE TRAP DIP - BLACK
Product Image
Formula One Dip

Professional blend trap and snare treatment that deodorizes. Protects and dries in about 24 hours. No sticky finish or waxing needed. Water soluble mix that is non-flammable. Water clean up and reusable. Mix with 2 to 3 parts of water. ODOR FREE!  FAST DRY!


KBL QUICK DYE - BLACK
 

 

Kaatz Bros. Lures proudly introduces this new cold dip. Directions: Mix 3 parts unleaded gas with one part KBL Quick Dye to give traps or snares a rust resistant, odorless finish. Use white gas/Coleman Lantern Fuel for best results, if using gasoline use a higher octane. When using mineral spirits, mix 2 parts to one part KBL Quick Dye. Traps/snares should be degreased and allowed to rust slightly before dipping with KBL Quick Dye. Traps should be dipped (for 20-30 seconds) and hung to dry in warm weather (65 degrees or warmer). KBL Quick Dye will coat best during hot days. One quart will dye about 2 dozen small traps (#1 longsprings, #110 body grips) or 1 dozen larger traps (MB-750, #330 body grips).

 
FULL METAL JACKET
 

Finally a trap and snare dip that is odorless, easy to dip and wears like iron. Acrylic Polymer that sets up super hard to cut off the oxygen to the trap so rust can’t start and the odor of the metal is locked under the dip. The dip is clear. You can use it on rusty, dyed, painted or new traps. It can be used in the water but was designed for land traps and snares. You DON’T add gas or water, just dip and catch fur!