| ~~ FUR HANDLING EQUIPMENT ~~ | |
| SIZE | DIMENSION | ½ DOZ | DOZEN |
| #1 - Muskrat | 7” x 21" | $16.45 | $27.95 |
| #23 - Coon, Opossum | 7-1/4" x 42" | $33.45 | $55.95 |
| #4 - Coon, Fox | 8-3/4" x 42" | $33.75 | $56.95 |
| #5 - Coon, Coyote, Bobcat | 9-3/4" x 48" | $37.75 | $62.95 |
| #6 - Coyote, Wolf, Bobcat | 11" x 59" | $46.95 | $69.95 |
REPAIR HOOKS
for WIRE STRETCHERS| Small #1 and #3 | $.70 each, | $7.90 dozen |
| Large #4, #5, and #6 | $.95 each, | $10.80 dozen |
|
RACCOON BOARDS |
|||
|
Custom Basswood raccoon stretching boards, made to the specifications of the Canadian Auction House. Two sizes so you can custom fit any size raccoon. |
|||
|
EACH |
½ DOZ | DOZEN | |
| Raccoon Board - Large/XL |
$9.30 |
$48.95 | $92.95 |
| Belly Wedge |
$1.00 |
$ 5.00 | $ 9.00 |
|
Large and XL
size boards for raccoon measuring 27” to 32”. |
|||
|
EACH |
½ DOZ | DOZEN | |
| Raccoon Board - Standard |
$7.80 |
$40.95 | $77.95 |
| Belly Wedge |
$1.00 |
$ 5.00 | $ 9.00 |
|
Medium and
small size boards for raccoon measuring 22” to 27”. |
|||
|
CUSTOM BASSWOOD MINK STRETCHERS |
||||
|
SIZE |
EACH | ½ DOZ | DOZEN | |
| Mink - Female | base = 3-1/4" | $3.40 | $18.95 | $33.95 |
| Mink - Male | base = 4” | $3.50 | $19.95 | $34.95 |
| Mink - Large Male | base = 4-1/2” | $3.60 | $20.95 | $35.95 |
| Belly Wedge | $1.00 | $ 5.00 | $ 9.00 | |
|
You may mix mink boards to reach desired quantities. |
||||
|
WOOD FOX STRETCHERS |
|||
|
4' long x 6" wide at base |
|||
|
EACH |
½ DOZ | DOZEN | |
| Solid Fox Board |
$6.90 |
$37.95 | $68.95 |
| Belly Wedge | $1.00 | $ 5.00 | $ 9.00 |
|
WOOD OTTER STRETCHERS |
|||
|
7-1/4" x 59" |
|||
|
EACH |
½ DOZ | DOZEN | |
| Otter Board - Regular | $10.90 | $59.95 | $109.95 |
| Belly Wedge | $ 1.00 | $ 5.00 | $ 9.00 |
|
WEASEL BOARDS |
||||
|
SIZE |
EACH | ½ DOZ | DOZEN | |
| Weasel Board-Small |
1-1/2" x 16" |
$1.30 | $6.95 | $12.95 |
| Weasel Board-Regular |
2-1/2" x 20" |
$1.50 | $7.95 | $14.95 |
| ½ Dozen | ... | $49.95 |
| Dozen | ... | $89.95 |
FUR HANGER
Hang your furs up after drying to keep them clean and free of becoming matted.
$2.95 each
$29.95 dozen
| Box of 100 | ... $6.95 |
| Box of 1000 | ... $64.95 |
CHICAGO 4" SKINNING KNIFE
PELTING KNIFE
The wavy edge does not dull like straight edge knives do. 3-1/4” blade and
sure-grip polyurethane handle. Unbeatable for ringing the feet and cutting
around the head. Razor sharp. Swiss made.
$6.95 each
BEAVER KNIFE
DOUBLE HANDLE FLESHING KNIFE
| STEEL 3/16 x 1 x 8" Blade | $11.95 each |
| STEEL 3/16 x 1-1/2 x 12" Blade | $17.95 each |
NECKER FLESHING KNIFE
This
is the genuine Sheffield fleshing knife, handmade in Sheffield, England. Blade
is 16.5 x 3 inches. Overall length is 29.5 inches to the ends of the handles.
$129.95 each
12" SHEFFIELD FLESHING
KNIFE
Handmade in Sheffield,
England. Blade is 12 x 3 inches.
Overall length is 24 inches to the ends of the handles.
$119.95 each
Now
anyone can flesh beaver after beaver with a little practice in 12-15 minutes.
The blade is razor sharp, but the angle of the blade allows the edge to ride
on the leather and easily slice off the fat and meat on a beaver, otter, and
the tough area on the raccoon’s neck. You will be able to remove fat and meat
from the beaver as fast as you can move your hands. Sound too good to be true,
well it’s not. The blade is made of high carbon steel, at a hardness of 56-58.
It’s handmade; not a cheap stamped out blade. The blade is on a slant that
helps keep the edge from cutting your pelt.
$44.95 each
SINGLE HANDLE FLESHING TOOL
SMALL PELT FLESHER
TAIL
ZIPPER
PLASTIC TAIL STRIPPER
MACHINED ALUMINUM TAIL STRIPPER
STANDARD SKINNING GAMBREL
CHAIN TYPE
SKINNING GAMBREL
| 8” wide x 48” long | ... | $34.95 each |
RUBBER
APRON
GROOMING BRUSH
| Standard | $6.95 each |
| Large | $9.95 each |
FUR COMB
Are
you spending too many nights in the fur shed? Wouldn’t it be nice to spend
more time on the line or more important with family? Nails, hammer and fingers
don’t mix, beaver boards don’t last long, push pins take time and if time is
important to you, here’s the solution: Switch to staples. Furriers have been
using them for years. Fur processors and trappers are using them. Lack of a
staple puller is why more haven’t switched.
TRAPPER’S HIDE TANNING
FORMULA| 1 bottle | = | $8.95 |
| 3 bottles | = | $25.00 |
| 6 bottles | = | $48.00 |