SULLIVAN’S TRAP TESTER
Easily and accurately measures the pan tension on foothold traps. Graduated from one to four pounds in one-pound increments.
$12.95 each

BASE PLATES
Base plates keep the trap's frame from bowing when using strong springs or 4-coils. Also keeps hard-fighting animals from bending the frame. 3/16" thick. Centered D-ring for attaching in-line swivel and chain. You choose method of attachment: welding, bolt-on, or rivet. Holes not pre-punched. Drilling required on bolt-on or rivet installation.

PRE-FORMED LAMINATION KITS
These kits are used to widen and strengthen a trap's jaws, to help prevent foot damage, and to keep hard fighting animals from dislodging the jaws from the frame. As the name says, these are 3/16" rod cut and formed to fit a specific sized trap. Just clamp and weld.

DOUBLE JAW ADD-ON
Fits most #1-1/2 Round Jaw Traps. Welding Required.
$13.95 per pack   24 pieces - enough to do 1 dozen traps

MONTANA 4-COIL KIT (SPRINGS)
Easy to install coilsprings for four-coiling the Montana #3 Special Trap.
$1.60 each pair,   $15.95 dozen pair

MONTANA #3 BASE PLATE
Base plates keep the trap’s frame from bowing when 4-coiled. 1/8" thick. Centered D-ring for attaching in-line swivel and chain. Will fit the Montana #3 Special trap, also fits most #3 and #4 coilspring traps, and most #4 longspring traps.  $1.50 each

MONTANA LAMINATION KIT
1/4” rod cut to fit the Montana #3 Special Trap. Used to widen and strengthen the trap’s jaws, to help prevent foot damage, and to keep hard fighting animals from dislodging the jaws from the frame. Just clamp and weld.  Each kit contains 24 rods – enough to do one dozen traps.  $11.95 per kit 

REPLACEMENT PAN for #3 MONTANA TRAP
Will also fit #3 Montgomery Dogless Traps.  $3.95 each
 

TAOS LIGHTENING SPRING 4-COIL KITS
J.C. Conner’s Taos Lightening Springs are the best 4-coil kits on the market. The double torsion springs are wound from music wire and will outlast any other 4-coil kits. The spring pin is made from high tensile strength steel and won’t bend like so many others. A sturdy lock with nut and bolt are included to prevent spring loss. Please specify CTK number, when ordering.

HEAVY-DUTY TRAP DOGS
Fits Most Traps. These heavy duty universal replacement dogs will fit most #1-½ thru #4 traps. Trimming is required for some traps.
        $.95 each
        $9.95 dozen
 

BARKERS CONI-PANS
Simply bend trigger wires over and clip the pan on. No trigger wires hanging down to cause the animal to shy away. Gives that wide-open look to an animal. Very effective for buckets and cubbies.
#110 / 120 … $9.90 dozen
#160 / 220 … $9.95 dozen

BARKERS MINKPAN
The minkpan fastens onto the trap pan to increase the pan size. By using the minkpan, you greatly increase the chances of the foot hitting the pan. Low cost, durable all steel construction, fast easy assembly or disassembly, increased competitive advantage, and fits all trap pan sizes.

BOLT-ON TRIGGERS
Fits all makes of traps. Won't fall off like the crimp on type triggers. Economically priced. Each contains: trigger replacement brackets, trigger wire, bolts and nuts.

 

BODY TRAP “TRIGGER WIRE” KIT
Mink and marten may freely pass through even the smaller body grip traps when set on land. In Canada, one test mink passed under a 110 body grip trigger 33 times before setting the trap off. This simple modification kit is for 110 and 120 size traps and utilizes a very fine 1/64” trip cable and wire ferrules. Comes with materials to modify two dozen traps.   $5.95 per kit
Not using modified body-grip traps?   You’re missing fur!


 

TRAP SPRING REPLACEMENT TOOL
Slips over spring end to easily install coil spring.   $1.95 each


#14 DRILL BITS
Used to install #10 pan bolts.   $1.95 each


#10 BRASS PAN BOLTS
These oversize pan bolts are 1/2" long and come with brass nuts and washers. Takes the "side play" out of trap pans and minimizes "false drop" to prevent animals from detecting the trap. Some trap pans and pan post must be drilled with a #14 drill bit, to install these oversize bolts. Highly recommended. Used by serious predator trappers from coast to coast.
        $.25 each
        $19.95 per 100
 

AUXILIARY SPRINGS
Auxiliary spring for Longspring Traps only. Will strengthen your old trap springs. Makes the old traps like new. Sold in dozen lots only. Fits #1, #1-1/2, and #2 long springs.   $9.95 dozen
 

#1-1/2 PINCH PAN REPLACEMENT
“The  Return of a Legend.” Fits Duke, Victor, and most #1-1/2 coilspring traps with similar pan mounts. Use pliers to bend both tabs down at 90 degree angles. Remove standard nut, bolt, and pan. Install pinch pan with one over-sized nut on each side of pan mount as spacers. By Somerville Mfg and Fur Co.
$1.95 each
$19.95 dozen

PIT PAN TENSION KIT
Paws-I-Trip II pan tension kits attach easily to conventional traps to provide automatic tension. Audible set point, minimal pan creep, and no pan wobble. Tension can be easily adjusted by bending the special dog up or down. Simple to install. No special tools or welding. 
(Each kit contains: pan, dog, and any required hardware).

CRIMP-ON CENTER LOCATORS
The easy way to center swivel your traps. Requires no welding or bolting. Tabs can be easily closed on trap’s frame with a pair of vice-grips. Rated at 500#s.

Two sizes:

CIRCLE TRIGGERS   by Hal Sullivan
Sullivan Circle Triggers help reduce "trigger avoidance" commonly encountered with standard V-wire triggers. The round opening provides an inviting passageway for the target animal. Converts your #110s into real mink taking machines. Reduces hip catches. Works well on muskrats too. The #220 model helps center coons and other large animals in your #220s for a quick dispatch. Made of heavier gauge wire to resist bending. Trigger comes complete with two-piece bracket and bolts for quick and easy installation on your traps. Makes an ideal replacement trigger.
                    #110 size ... $1.15 each, $12.95 dozen
                    #220 size ... $1.50 each, $15.00 dozen

PIT CUSHION SPRINGS
Provides a dampening effect and gradually decelerates a trapped animal’s lunging thus minimizes foot and shoulder injury or pull-outs. Can be hooked directly in-line to the chain or use in-line swivels for hookup.

“SLIDE ACTION” T-BAR SHOCK SPRING
A new style with a more competitive price without sacrificing quality. Designed to LAST! By J.C. Conners. 100% Coyote proof.
        $2.95 each
        $29.95 dozen